2025 Mako 214 CC

• Length:21' 5"

• Beam: 8' 6"

• Bottom Width: 6' 7.5"

• Max. Recommended HP: 250 HP

• Fuel Capacity: 91 gal.

• Max. Person Capacity: 10 persons

• Max. Person Weight: 1700 lbs.

• Max. Person, Motor & Gear Weight: 2550 lbs.

• Interior Depth: 27"

• Transom Height At Center Line: 25"

• Deadrise: 18 degrees

• Draft: 14"

• Average Dry Weight: 3735 lbs.

• Average Hull Weight: 3100 lbs.

• Average Package Weight: 4535 lbs.

• Package Height: 9' 3"

• Package Height w/T-top or Hardtop: 11' 2"

• Storage Length: 30' 8"

Certification & Safety

• Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats

• NMMA® certified

• Factory leak tested for hull, plumbing & fitting integrity

• Swim platform w/3-step stainless steel ladder

• Horn

• Flush-mounted Ritchie Navigation® Voyager compass

Console

• Acrylic windscreen

• Stainless steel steering wheel w/knob

• Tilt hydraulic steering

• Binnacle-mounted motor control(s)

• Mercury® SmartCraft® digital gauges

• Heavy-duty electrical switching system w/battery selector switch(es)

• Switch panel w/manual reset circuit breakers & illuminated switches

• Easy access to helm electronics, instruments & switches

• FUSION stereo w/4 speakers

• Removable forward-console seat w/70-qt. (66.24 L) insulated, drained cooler

• Integrated full-width footrest

• Marine-grade tinned wiring w/submersible connectors

• Lockable, sealed glovebox

• Extra-large electronics mounting surface

• 2 console drink holders

• 12V DC outlet

Leaning Post

• Powdercoated aluminum leaning post

• Helm seat w/flip-up cushion

• Storage below seat

• Space below leaning post for optional cooler

• Rod holders

Top

• Outrigger-ready canvas T-top w/4 rod holders, electronics box w/mounting plates for antenna & spreader lights

• .25" (6.35 mm) aluminum backing-plate reinforcement for T-top

Head

• Head enclosure/storage space w/stainless steel latch

• Wiring access hatch & battery access

• Main distribution panel inside head

• Courtesy light

Interior

• Anchor locker

• Foredeck dodger mounting boss

• 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats

• Port & starboard forward seats w/108-qt. (102.21 L) insulated storage below w/gravity overboard drainage

• Forward cushions w/removable backrests

• 210-qt. (198.73 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket

• Low-profile powdercoated aluminum bow rails

• 2 gunnel-mounted rod holders

• Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.13 m) long

• Aft stern seating w/folding center backrest

• Molded non-skid surfaces throughout

• Raw water outlet

• Bilge access hatch

• 360° coaming bolsters

• Five 6" (15.24 cm) polished marine-grade stainless steel cleats

• 2 stainless steel bow chocks

Exterior

• Legendary dry-riding MAKO® hull

• Aggressive deep V hull design

• Performance lifting strakes

• Recessed electric trim tabs

• Factory-matched stainless steel propeller

Construction & Exterior

• Color: MAKO® Bone White gelcoat

• 100% composite construction

• Coosa® Bluewater 100% composite transom core

• Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core

• Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners

• 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish

• Closed-cell foam-injected stringer grid for USCG-approved flotation

• Heavy-duty rub rail w/stainless steel insert

• Premium marine-grade stainless steel hardware & fasteners for corrosion resistance

• Closed-molded hatch covers w/finished undersides & integrated gaskets

• Aluminum backing plates for cleats & chocks

Electrical, Mechanical & Plumbing System

• High-speed raw water intake

• USCG-compliant navigation lights

• Interior courtesy lights

• 2 cockpit courtesy lights & 1 head light

• Dual battery rigging

• TRACKER® Lithium WRM100HP/31 cranking battery

• Heavy-duty electrical switching system

• Marelon® corrosion-free seacocks on all below-water thru-hull fittings

• Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

Optional Trailer

• OPTIONAL tandem-axle EZ Loader® aluminum trailer available

• NMMA® certified

• DOT approved

• Stainless steel hardware

• Galvanized steel components

• Tandem-axle brakes

• 14" (35.56 cm) galvanized V5 wheels w/radial tires

• Oil bath hubs

• Leaf spring suspension

• Heavy-duty winch w/nylon strap & safety strap

• LED lighting

• PVC loading guides